QL-GV50CG
  • alt
  • alt
  • alt

QL-GV50CG

  • LTE Cat 1 with 2G back-up
  • Input voltage range from 9 to 90 V
  • Compact size
  • Description

    The GV50CG is an entry-level, cost-effective 2G GNSS Cat1 LTE backup [%VAR%] GNSS tracker. Extremely compact design for concealed installation. Its compact size and powerful features make it an ideal choice for various transportation surveillance applications, such as vehicle financing, stolen vehicle recovery, vehicle leasing and logistics.

    • Queclink
    • LTE Cat 1 with 2G back-up
    • Input voltage range from 9 to 90 V
    • Compact size
  • Specifications
  • Contents
  • Downloads

The GV50CG is an entry-level, cost-effective 2G GNSS Cat1 LTE backup [%VAR%] GNSS tracker. Extremely compact design for concealed installation. Its compact size and powerful features make it an ideal choice for various transportation surveillance applications, such as vehicle financing, stolen vehicle recovery, vehicle leasing and logistics.

  • Queclink
  • LTE Cat 1 with 2G back-up
  • Input voltage range from 9 to 90 V
  • Compact size
BrandQeclink
ModelGV50CG
InstallationHidden under hood
Operating bandLTE FDD: B1/B2/B3/B4/B5/B7/B8/B20/B28
LTE data transmissionLTE-FDD: Max 10Mbps (DL)/Max 5Mbps (UL)
Frequency850/900/1800/1900 MHz
GSM data transmissionEDGE: (DL)236,8 Kbps/(UL)236,8 Kbps
GPRS: (DL)85,6 Kbps/(UL)85,6 Kbps
GNSS typeAll-in-one GNSS receiver
Constellations supportedGPS,Beidou
SensitivityCold start: -147dBm
Hot start: -155 dBm
Tracking: -160 dBm
Location Accuracy (CEP)Autonomous: < 2m
First position (TTFF) - open fieldCold start: 28 seconds approx
Hot start: 1 second approx
Dimensions76(LA) × 39(AN) × 16(AL) mm
Weight71.5g
Backup batteryLithium Polymer, 190 mAh
Working voltage9V ~ 90V DC
Working temperature-30℃ ~ +70℃
-40℃ ~ +80℃ for storage
Message bufferUp to 10000 messages
Digital InputsA (1) positive trigger input for ignition detection
Configurable InputsOne (1) input configurable for analog input (0 V ~ 16 V) or negative input
Interlocked Digital OutputOne (1) digital output with internal latching circuit, open drain, maximum drive current of 150 mA
Cellular antennaInternal only
GNSS AntennaInternal only
LED indicatorsCEL, GNSS
Micro USB interfaceFor configuration, updating and debugging
Transmission ProtocolTCP, UDP, SMS
Scheduled ReportReport position and status based on preset time intervals, distance, mileage or a combination of these settings
Geo-fenceGeo-fence and parking alarm, supports up to 20 regions
Speed alarmFlexible speed monitoring, with abnormal speed alarm
Low Battery AlarmNotifies alarm when battery is low
Trawl alarmTrailer alarm in off state
Driver behaviorDetect aggressive driver behaviors, including hard braking, hard acceleration, etc.
Collision DetectionCollect crash data for reconstruction and analysis
Remote controlDigital output OTA control
SOS AlarmReport of alarm message triggered by the emergency button
Virtual Ignition DetectionBased on voltage and accelerometer
Interference DetectionAlarm based on interference detection
  • Device only