Brand | Queclink |
Model | GL530MG |
Installation | Flexible |
Operating band | LTE Cat M1/NB2 Cat M1: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/ B27/B28/B66/B85 Cat NB2: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/ B28/B66/B71/B85 |
LTE data transmission | eMTC (DL) 348kbps eMTC (UL) 1.08Mbps NB2 (DL) 121kbps NB2 (UL) 150kbps (UL) [%VAR%] NB1 (DL) 74.1kbps NB1 (UL) 101kbps (UL) [%VAR%] |
Work frequency | EGPRS 850/900/1800/1900 MHz |
EGPRS data transmission | GPRS 107 Kbps(DL)/ 85.6 Kbps(UL) EDGE 296 Kbps(DL)/ 236.8 Kbps(UL) |
Dimensions | 87 × 51 × 30mm 3.43’’(Largo) × 2.01’’(Ancho) × 1.18’’(Alto) 87 × 51 × 33.5mm 3.43’’(Largo) × 2.01’’(Ancho) × 1.32’’(Alto) (version for mounting in magnetic housing) |
Weight | 140 g 160 g (version for mounting in magnetic housing) |
Backup battery | 3 lithium batteries CR123A, 1 400 mAh |
Duration | 1 report up to date (GNSS activated): 5 years 1 report per day (cell ID only): 7 years |
Watertightness | Conform IP67 |
Working temperature | -20℃ ~ +60℃ |
Internal temperature sensor | To control the temperature Accuracy: ±1℃ |
Internal light sensor | For tamper detection |
Vibrator | For confirmation signal when pressing the function button |
Magnetic Mounting Housing (Optional) | For easy installation on metal surfaces |
GNSS type | U-box all-in-one GNSS receiver |
Constellations | GPS, Glonass, Galileo, Beidou |
GNSS sensitivity | Cold start: -148dBm Hot start: -160 dBm Tracking: -167 dBm |
Location Accuracy (CEP) | Autonomous: < 2m |
First position (TTFF) - open field | Cold start: 24s approx Hot start: 1s approx |
Function button | Used for power on/off and operating status check |
LTE Antenna | Internal only |
GNSS Antenna | Internal only |
LED indicators | GNSS, State |
Commands | Queclink Protocol Commands |
Transmission Protocol | TCP, UDP, SMS |
Working Modes | Power saving mode for extended standby time Continuous mode for emergency tracking |
Scheduled report | Position and status reporting at preset time intervals |
Geo-fence | Supports up to 20 regions |
Battery alarm | Alarm when internal battery power is low |
Activation report | Report when the device is activated |
Motion Detection | Motion detection based on internal accelerometer of 3 axes |
Setting the Reporting Frequency | Intelligent adjustment of notification frequency |
-
About UsLearn more about Visiotech and what we do
-
ContactGet access to our contact information
-
Work with usDo you want to join the team? See our job offers
-
NewsFind out the latest news on technology, products and trade fairs in the industry
-
Project DevelopmentDiscover our project planning and development service